Every floor trained and accounted for

Fire safety for office and high-rise buildings. Each floor's poster has two QR codes: one trains occupants, one reports emergencies.

Safeground LEVEL 5 TRAINING Scan to learn this floor 8 minutes, no app IN A FIRE 1 Get people to safety 2 Pull the alarm 3 Check your area, if safe 4 Report status 5 Use the stairs 6 Go to the assembly area REPORT Fire Someone needs help Floor clear

Paperwork says the training happened

A training file shows that something took place. It does not show that the people on a floor know their way out, or that anyone will report when the floor is empty.

The warden is working from home

Floor wardens are assigned by name, and with hybrid work they are often not in the building. Whoever is on the floor that day has to know what to do.

The list of who needs help goes stale

A printed list in the fire safety box is out of date after the first vacation or desk move. Where someone needs help has to be reported as it happens.

A full evacuation rehearses the rare case

Emptying the whole building is expensive, practices something a real incident rarely calls for, and leaves out people who cannot use the stairs.

Two codes on every floor's poster

The black code trains the floor

Anyone on the floor scans it and takes the training in their phone's browser, with no app to install and no account to create. In about eight minutes they see this floor's plan, go through the six steps for a fire, and take a quiz they can retry until they pass.

What you getA training record: who passed, when, and for which floor.

The red code reports a real incident

On the way out or at the assembly area, anyone scans it and sends one of three reports: fire, someone needs help, or floor clear. Building command sees it as soon as it is sent. It does not replace calling 911.

What you getThat floor's status on the building's command board.

The six steps in the training are the six steps printed on the poster, and step four is the report. People practice the same actions that produce the incident report in a real emergency.

Building command sees every floor

During an incident, one board shows the whole building: which floors are clear, where a fire was reported, and where someone still needs help.

When the fire department arrives, print the board as a one-page incident report and hand it over on paper.

Level 8 Clear Level 7 Clear Level 6 Needs help Level 5 Fire reported Level 4 Clear Level 3 No report yet Level 2 Clear Level 1 Clear
Example: an eight-floor building partway through a drill.

For the people who manage the building

Floor plans from an address

Enter the address and the building's outline comes from OpenStreetMap. Or upload a drawing you already have and trace over it.

A poster for every floor

Each floor gets a printable poster with its plan and both codes, ready for the wall.

Drills that run the real flow

Start a drill and floors report through the red code as they would in an incident. Everything in it is marked as practice.

Every building in one view

A portfolio dashboard shows training status across all the buildings you manage, so you can see where training is behind.

See it working

Safeground is new, and this site runs a working demo. Open it the way someone on a floor would, or sign in to the dashboard if you manage a building here.